Guild Wars 2

If you have your video driver crush you need to do:
– if you use Asus card download Asus GPU tweak;
– If you use another card download MSI Afterburner
– install and run this program.
– you need to use option GPU voltage. Increase voltage by 1 or 2 steps(one step is 0.012). For example my GPU voltage was on 0.975 after increase this to 1.000(1st step – 0.987: 2nd – 1.000) I no longer suffer from video driver crash.
- also you need to try increase GPU clock too by 1 or 2 steps(1 step 10 Mhz).
For me it looks like by default I have GPU clock – 775 Mhz GPU voltage – 0.975 and many-many video driver crush. At 800 Mhz(1st step -785 Mhz: 2nd step 795-800 Mhz ) and 1.000 voltage(1st step – 0.987: 2nd step – 1.000) GW2 work fine without video driver crush…
– Then press “apply” and save this profile like “1”
– every time before run GW2 run Asus GPU Tweak or MSI Afterburner and load your saved profile.
Maybe someone will have stable after 1 step for clock and voltage…
Video driver crush happen because GW2 “think” that your factory overclocked(most of cards now factory overclocked) card is unstable so if you wanna play without crash try my little guide. Good luck!