Guild Wars 2

ok iu just gota second card to run crossfire and now the game randomly freezes along with the computer an I goptta rebot nnot sure what to do. compirtewr is a core i7 with 2x radeon 7850’s 650watt psu

bump 15 character m,mi8nimum

What PSU are you running? Are you overclocking at all?

Try downloading and running Heaven Benchmark by Uningine. Run the software through a couple cycles. See if you get any errors, hanging or freezing.

http://unigine.com/products/heaven/

yesa no errors there and I know trhe second card works toward the game but while running that heaven benchmartk gpu-z showed that one of the cards was in 2d mode not running at full power

my psu is a cooler master real power pro 650 watts has 2 aux 6pin one for each card, the pro line is there premium line

The PSU looks good, just wanted to check. I personally would rip and reinstalling the drivers, make sure you have the latest.

Unfortunately, I am not a big fan of AMD so I am unfamiliar with the software used for your GPU’s.

I’ll do a bit more research and see if I can’t dig something up.

I used the AMD uninstaller and completely cleaned the drives out and re-installed the craps crossfire is indeed running in crossfgire but im wondering if gpuz is wrog or if its ereally running oe of the cards at 300mhz now I read somewhere in here but I forget where and cant find it that some cardsw get stuck in 2d mode soi I need to try the fix to get the one card ubnstuck from 2d mode.

I have heard of people using ASUS GPU Tweak to disable the 2D on the 7850. Not sure if that would help.

well I got softeware fr4om the HIS company it disabled 2d clocks only problem with that is it freaez the game I gtot it working now but about the 2d clocks one of my cards is infact getting stukitten in 2d, how do I fix that I don’t want to use the disble2 option onb the software becauser that setting there makes game crash there was an article on here but I cant find it

bump still tryin to figure this out. so far iv un-installed guild wars deleted the folder and re-installed graphics driver how do I fix thwe 2d/3d clocks it looksa like what is dsoing this

Have you updated your motherboard’s bios to the latest? Try that and make sure you aren’t exceeding your psu’s limit if you are sure that it’s capable of feeding your rig then my question is how old is the psu? If it’s older than one year, its capacitors start dying and the power they supply degrades ofc this assumes that you are using the rig considerably long every day.

older chipset but is most recent x58 intel board core i7 bios up to date. as for the power supply it is 3yrs old 650watt but real power pro from coolermaster there premium line although coolermaster not the best I do trhink its enough power however have questioned it.

am trying different things to get it stable anet needs to get off there but and code this game for crossfire better cause its definatly the game.

I can be playing music in backround and all when it freazes it freazes the game but the music I got playing in the backround keeps going so although I cant alt tab out or window out im assuming everytrhing else stays running fine altrhough I ahev to reboot cause game freazes and I cant ctrl out and end game.

all the help you guys can give would be appreacviated am in contact with ncsoft/anet but there so slow

Have you checked your CFX bridge? any change that its been damaged or like not properly fit in the slot? those kinda little things mostly bring bigger problems… Also have you been overclocking any of the parts? cpu or the gpus? have you tried any other games encountered similar problems?

I think I figured it out was some corrupted direct X files and my cards are getting to hot one reached 101c now to figure out how to keep these bad boys kool I have a nice antrec 1200 case prolly have to do some custome coolers or somthin for the cards or test to make sure the new one aint messed up cause ones running 26c hotter the the other

winterlove.6834:

I think I figured it out was some corrupted direct X files and my cards are getting to hot one reached 101c now to figure out how to keep these bad boys kool I have a nice antrec 1200 case prolly have to do some custome coolers or somthin for the cards or test to make sure the new one aint messed up cause ones running 26c hotter the the other

make sure you make some room in cards put some kind of rubber block but make sure you dont over do it so the pcb does not bend