Guild Wars 2

CPU: Intel Core i5-2500 3.30GHz Socket 1155
GPU: Gainward NVIDIA GeForce GTX570 Golden Sample
RAM: 8 GB G.Skill Sniper F3-12800CL9D 1600MHz
MB: Asus P8Z77-V LX

Cause i’m not good to troubleshoot performance issues (i don’t know where and how make changes and i have already latest drivers) and i don’t know any tweak, i would use your help!

Thanks in advance!

What fps #‘s are you getting, and where? (See Part 4 here)
What do you mean by infinite loading? The map doesn’t load?

Do a -repair on the game. (See Part 1.1 here)

Normally i get 30-35 fps, but when i do events like Claw of Jormag, i get 4-5 fps…there are many characters doing these events, but i can’t think that this drop down is normal…

For infinite loading i mean that i wait at least 30-40 seconds to leave the load screen and walk in the map (worst of all Lion’s Arch obviously)

Now i will do a -repair and follow the FAQ, if you have any more advice tell me!

Thank you!

Loading times are high but still between normal range if u are not using a SSD, FPS are very low for ur system, most likelly u are facing a CPU problem. Make sure ur CPU is runnig at full clock speed and showing normal thermals, download CPUz and monitor the CPU performance while gaming using that tool.

While gaming CPU is used by around 80-90% and temp is 65-70°C

Looks like my pc is too hot…isn’t it?

Nah, under load that temperature is normal for a CPU.

at the same time GPU is at 55°C

what i see is that CPU and GPU never work at 100% but always at 80-90% for CPU and 60-70% for GPU…

CrazybikE.1524:

at the same time GPU is at 55°C

what i see is that CPU and GPU never work at 100% but always at 80-90% for CPU and 60-70% for GPU…

The temperatures are normal for both GPU and CPU.

What you are seeing is that your CPU is the bottleneck of your system. That is, your CPU is not fast enough to feed enough commands to your GPU to process. Since GW2 uses 3 heavy threads and a bunch of small ones, its doubtful you’ll see 100 percent utilization when just running GW2. Those percentages are about right since theoretically GW2 will use approximately 75% of your CPU while the other core is left to do other programs you have running, like steam or vent/ts3 etc etc.

If you had the 2500*K* then you could overclock the processor to get it to match your 570.

what a pity, i was hoping to find a problem and a solution by software, but it i’snt

thank you