Guild Wars 2

Sylvari Medium Cultural Tier 1 Gloves – Chunk Missing/Tugged Node

Species: Sylvari
Gender: Female
Class: Medium Armor
Item: Evergreen Gloves (Sylvari Cultural Tier 1)
Issue: Armor has a chunk missing or a tugged node on the right hand

Description:
The tugged node or missing chunk of the glove on the right hand causes an open seam at the wrist, which leaves a section of no glove and no skin visible.

• 4 Month Update
  Issue persists.
  Added a current image (bottom).

Race: Charr
Sex: Female

Issue: I had a break from the game and now that I got back I see my charrs horns turned red. Why? It looks awful, so please give me back her old horns. I’m speaking about those little ones on her neck.

Race: Sylvari
Sex: Male
Class: Thief

When I move (all I have to do is take a few steps), my armor colors get messed up and some parts turn greyish like the images on the left. After a few seconds, the proper colors gradually “pop” back to normal. It only seems to happen with dark dyes, the main color on each piece is midnight ice/fire and if I try something like blue ice it doesn’t happen. A friend said that she could also see it happening on her screen, so probably not just my computer.

The issue started around November or December. I have also tested it with PvP T1 armor and it doesn’t seem to happen even if I use the same dyes, seems like it might be only with the PvE versions?

It’s most noticable on the T1 top and the T2/T3 pants. Other pieces like the T3 top and the T1 boots seem to be affected as well, but it’s not as obvious. I don’t know if it happens to other cultural gear since that’s all I have.

Race: Sylvari
Sex: Male
Profession: Guardian (Warrior as well)
Armor Set: Radiant shoulders and Heritage shoulders (among many others)

Description: On the two largest male sylvari body sizes, many non-cultural armor shoulders appear ridiculously large, to the point of being nonsensical. To illustrate this, I’m using radiant armor (from achievement points) and heritage armor (from hall of monuments) as an example, since they’re easily accessible. I’m certain this is a problem on more than these armors though (CoE shoulders and barbaric shoulders come to mind).

1st Image: Sylvari guardian wearing Radiant Pauldrons. Notice that the shoulder pieces extend well into the chest area, covering up a good 1/2 of the chest. Also notice that the shoulder piece comes far off the shoulders, over an arm’s worth of “thickness” away.

2nd Image: This is a reference image of what the shoulders look like on a human instead. Note that they are much less intrusive.

3rd Image: This is a reference image of the same sylvari from the first image but with full cultural tier 2. Notice that the armor is relatively slimming and proportional.

4th Image: Same concept as image 1, but with Heritage Pauldrons. These shoulder pieces are so large… I don’t even know what to say.

5th Image: This image is to show that the heritage shoulders are out of proportion even with a complete set. The shoulders literally never touch the body, and is floating a good 4-5 inches off the shoulders.

6th Image: Same setup as the 5th image, but on a human instead. Note that the shoulders are much more in line with the whole set.

I know this is old, but I feel like it’s the little things that matter. Other miscellaneous notes is that this isn’t as big of a problem on the “default” sylvari size (first option), or any of the smaller options. I suspect that the scaling for the shoulder pieces is wildly out of control for the larger sylvari body types though.

I hope this gets fixed soon, or at least eventually.

Hello! Looks like one of the new female Norn hairstyles clips with Magnus’ eyepatch.

Crafted Kudzu today (yayyyy)
There is one rather awkward thing about it that looks badly miss placed, the Bow String.
When you look at the image provided below, it does not connect to anything at all, it’s just a piece of string floating in mid air o_o The top portion isn’t even close to a petal or the kudzu at all … Could just move the string closer to the ends of the bow before the flowers blossom out, the string nocks are there at the top and bottom ^-^

Human
Ele
Female

New hairstyle clips with elementalist’s token “eyes”, all of them. Please consider changing the volume of the front part close to the forehead.

Race: Asura
Sex: Female
Class: Mesmer

Item: Winged Tunic

As seen on the screenshot, one (or maybe two) part(s) of the sash seem to be placed on the wrong side of the Tunic.

ISSUE: ANY back piece being seen on the exotic orrian armor set purchased with arah dungeon tokens.

Race: Asura
Sex: Male
Class: Elementalist

The attached photos show the clipping issue with the “infused fractal capacitor”. Its clear in the photo that the armor pieces basically completely cover the back piece, and also cover many others from being seen on the outside.

I believe the clipping issues is a result of the shoulders and chest pieces:

-corrupted orrian mantle-exotic lvl 80
-corrupted orrian vestments-exotic lvl 80

Race: Human
Sex: Female
Class: Ranger (However, applies to Medium Class in general)
Armor Piece: Slayer’s Vest/Stalwart Coat

I notice there’s this issue on the character’s neck with this coat. I don’t know if this also happens on Norn females/males or Human males, but it’s extremely bothersome.
As evidently seen, the entire neck area is awkwardly shaded.

Can this possibly be fixed?

Race: charr female.
problem: I dont want to carry my axes at my feet… see schreenshot :P
It persist when i run.
I use: http://wiki.guildwars2.com/wiki/Norn_Axe Shaman kind
…

Race: Norn
Gender: Female
Class: Warrior

Phalanx Warboots + Invaders Chainmail Chausses

Video: http://youtu.be/3ltknjEGfhE

Race: Human
Class: Ranger
Sex: Male
Armor: Assassin (human cultural tier 3)
Armor with issue: Assassin’s Coat (chest armor)
issue= there is graphical glitch near the right arm. please fix it

graphical glitch in human medium chest cultural tier 3 armor are not effected by other armor pieces. the glitch only in the chest pieces on human “thin” body. so i don’t screenshot the “hero panel (H)”. please fix that glitch. its not really a hard glitch to fix i think. its just moving one coordinate of the armor.

Race:Charr
Class: Warrior/Guardian
Sex: Female/Male
Armor: Dreadnaught (Tier 3 cultural Charr, heavy)

Armor issue: Bugged shoulders, the arc on the shoulder seems bent inwards, same as the last spike on the shoulder.
The bent spike has been there for a long time, but the arc bending seems new.
Please fix both

I’m using the thiniest charr body available. Male guardian.

1. The ascended helmet does not look like one for a heavy profession.
2. There are red spots on the armor which can not be dyed. Sure it is not much but in terms of quality…

See the attachment.

Dear Anet Artists, you’ve been amazing at listening to the community’s concern’s regarding aesthetic bugs.

I ask that you fix the COE medium armor set. The middle part that goes down to the floor looks ridiculous when your character is in combat stance. Please see attached pic.

Here is how it looks when standing regularly….

Sorry if it is already posted but it is some major clipping issue.

Race: Human
Class: Elementalist
Sex: Female
Armor: Acolyte coat (exotic level 80) + Ascended wristguard (level 80)

I don’t know if you read this thread anymore but here goes:
Race – Asura
Sex – Female
Description:
Strange lump on her neck, mainly on her right side

Ps. Majority of the female asura faces have neck lump issues of some sort in combat stance, not just this one but this one has them in idle more than the others I’ve tried

Race – Charr
Sex – Male (probably Female too…)
Description: MAJOR great sword clipping issues on back!

I remember back when my Charr Warrior looked kitten with his greatsword on his back. Now it just looks like kitten . WTF happend!? And it isn’t just this greatsword skin, it is most of them…

Barabbas.8715:

(snip)

To be honest you are using one of the slimmest greatsword skins that clip the most with the thickest armor piece. And weapons held on your back are bound to clip or hover. Pretty much every single one for every single race, not just this one

Race- ALL
Sex- ALL
Description: All of the Aetherized Nightmare skins do not have the glow that they are supposed to. Which is quite sad considering the amount I paid for all of them. Daggers are the worst.

Race: Asura
Sex: Female
Class: Necromancer

Items in question:
Bloodclaw’s Bone Hood of Divinity (helmet)
Seraph-Issue Mantle of Divinity (shoulders)
Both obtained from renown heart rewards in Gendarren Fields

Ok so what is happening is that the helmet seems to include both the model for the helmet and the shoulders, so when I tried to dye my shoulders the color would not change unless I changed the dye coloring on the helmet.

In the first screen I am just wearing my shoulders but with a different dye color than the rest of my armor.

In the second screen you can see that I am wearing the helmet but NOT the shoulders. However, the shoulders are being displayed on the character using the dye colors I chosen for my helmet.

The final screen shows both helmet and shoulders being equipped, but I did not change the color I used for the shoulder dye (the shoulders should look like they did in screenshot 1 but it does not).

I do not know if it is just an issue for this particular armor set or is also happening to other race/profession combos, but it is a very subtle issue.

Race: Human
Sex: Female
Class: Elementalist

The leggings part of the Human Tier 2 light cultural armor Aristocrat’s Pants is too thick and clips with a number of boots; the clipping is most evident with Feathered, Masquerade, Acolyte/Apprentice, and Ascalonian Clergy shoes, with slight clipping around the ankles for Student and Cabalist shoes.

Idk if this was posted yet but the lynx female charr new face seems to have a cliping issue with its botom teeth actualy getting trought its lips. There are several picture of this on the charr forum female topic. I find it sad such a cute visage would have a bug with the botom teeths. Im sadly not curently on my own computer otherwise id also put a picture but im prety sure those teeths placement werent actualy intended.
(asura have their sharp teeths behind their lips why do a female charr model has them actualy moving trought it?)
I made a red square around the area wich i think is having a cliping issue

Asura, Male, Mesmer

Cut in the neck of my Asura when wearing the Vigil Mantle and sheated Weapon
With every possible combination of Faces/Hairstyles/etc.

Whisper’s Cowl (Armor Requisitioner Betje)
Vigil Mantle (Crusader Eira @ Vigil Keep)
Vigil Garb (Crusader Eira @ Vigil Keep)
Vigil Gloves (Crusader Eira @ Vigil Keep)
Genius Leggings (Clott @ Rata Sum)
Genius Boots (Clott @ Rata Sum)

All require lvl80 due to Transmutation

Ghastly Greatsword/Ghastly Sword/Zenith Flame
Holographic Shattered Dragon Wings

Description:

A Clip/Fissure in the Neck most visible with sheated Weapons (seen as red circle in the picture)

Race: Norn
Sex: Female
Class: Elementalist
Item: Cloth aquabreather (the one that drops from tequatl chest)

Description:
Whenever i go underwater, the mask changes the texture of my shoes. I tried with other aquabreather, but they didnt give this weird texture on my shoes. It seems it only affects high top boots, such as what im wearing in this picture

Issue 1: Male sylvari have an invisible hoop skirt, and the effect becomes ever more horrendous as their model size goes up. Pictured is an engineer in a swindler’s coat, but this happens with a ton of different armours—CoE medium coat is also really bad for it, and some heavy leg armour practically turns into a tutu. See how the front of his coat is floating way out from his hips? Clothes don’t do that.

Issue 2: Sylvari eyes are still frequently borked in sunlight. They get this weird dark mottling over one eye. Everyone I know who plays a sylvari has had this problem. Both genders.

Issue 3: Antialiasing on hair is messed up. It has been messed up thusly since I started playing at prelaunch. It looks fine in the character generator or makeover kit, but ingame, it’s ghastly.

Race: Human
Sex: Female
Class: Thief
Conquest Gloves [&AgEqDwAA] clip through your wrists

Race: Asura
Sex: Female
Class: Guardian
There is the graphics bug when the asura leans to her combat stance and a empty zone appears on her back, just between chest part and legs

Race: Sylvari
Gender: Female
Class: Ranger

Item Issue: Scarlet’s Grasp w/ Evergreen Coat

I wanted to use Scarlet’s Grasp with the Sylvari Cultural Tier 1 Evergreen Coat, but for some reason only the hands show, but not the arm guards on Scarlet’s Grasp. Is this intentional? All the other cultural medium coats work just fine.

Charr

Female (guess this goes for both genders)

Tail-clipping in Peonix light armour from Gem store

If u are going to fix tail clipping – do it properly! here u have added a flap to make it look good – but it stills clips!!!! Not looging good, plz do u’r homework and do things properly while ur’e at it!

Race: Human
Gender: Female
Class: Elemantalist
Issue: hair physics problem

the bangs of this hairstyle is bugged while running forward

Race: Human vs. Asura (other races untested)
Gender: Male
Class: Medium armor users
Issue: Dye pattern on Seraph-Issue Jacket (obtained via Kessex Hills heart vendors)

The dye patterns for the Seraph-Issue Jacket don’t match across these races, making this armor look arguably way better on humans. Upon closer inspection it seems that the dye swatches don’t match up in placement either.

Norn
Female
Nude and/or all armors
Issue is with a specific hair style. This one clips into the Norn’s body in any stance other than neutral stance/weapons sheathed. This hair style is also available for humans who somehow do not have the clipping issue, asking the Norns be given the same fixer that the humans clearly got, ty.

https://forum-en.gw2archive.eu/forum/game/gw2/A-specific-armor-design-request/first#post3895990

My post here deals with issues caused by the basic mesh or frame used by Norn females when applying armor meshes over them, if you could merge the threads or have a look it would be much appreciated.

Charr

Male

Back clipping with weapon (staff)

I know no medium class can use a staff (yet) but still….

I have seen swords clip Before… but this clipping with this armour combined with a staff….!!! When the character is naked there is no clipping trough any part of the character. But the staff is VERY Close to the back.

Norn
Female

Some of the skins are sticking out of the underwear, I circled it with red line to make it easier to spot the clipping.

Strider’s Boots -GEM STORE- Clips With Bare Legs And Most Pants

Species: Sylvari
Gender: Female
Class: Medium Armor
Body Type: All.
Item: Strider’s Boots (Gem Store)
Issue: Clips with bare legs and 90% of leggings

Description:
Boots clip with the bare skin of the character.
Also clips with pretty much every pair of leggings in the game.

Pretty disappointed that yet another gem store armor has issues…even with the bare skin of the character. Are they not even test worn on different body types? Takes 5 minutes to test it on each body type of a single gender of a single species. Please spend a fraction of an afternoon and check new armors out properly on characters before throwing them into the store.

After buying almost every gem store armor released, I have only a single one that doesn’t have clipping all over it or some graphics issue like red bleeding all over its edges.

For gems/real money they should be of high quality.
There is no excuse for Gem Store armor to be clipping with the bare skin of the model (let alone the reported issue of the Zodiac chest clipping with itself that still isn’t fixed)!

Real disappointing.
Why continue purchasing armors if this is the quality of them that gets released?
And after months of these issues with Gem Store armors being reported they’ve still not been fixed…

Race: Charr
Sex: Male
Class: Warrior
Armor Piece: Temple Armor Shoulders and Plated Chest (the WvW one)

The character has the tallest and largest body and the shoulders clip very badly with the chest piece.

Also the fur clips through the chest piece on the back when jumping. Or it’s not the fur but the part of the armor underneath the outer scales that is of a different color.

Edit: it’s definitely the part underneath, extremely noticeable while swimming.
Edit 2: it happens with the temple chest as well.

Human
Male

Inventor’s glasses clips with my character eyebrows.

Human
Male
Default Physique
Embroidered Leggings
The end of the sash clips into the front of the leg while in standing position. I’ve played around with the total makeover kit and noticed that the slim physique almost removes the issue (still a bit of clipping) while the thicker body type makes the hanging part of the sash almost completely disappear into the leg.

Race: Asura
Sex: Female (issue probably also exists on male)
Profession: Any
Armor Set: Tier 2 Cultural Armor; Auxillary Powered Coat

Left leg clips through the coat while jumping. This occurs regardless of the character’s leg/boot appearance. It even occurs with the matching Tier 2 boots/trousers, or when wearing no trousers or boots at all. Left side of the coat just needs to flap slightly more during the jump to avoid this. Tested with two different body types (Was body type 4; bought a make-over kit to try a smaller body type but it still occurs on type 1).

Race: Sylvari
Sex: Male
Profession: Warrior (most likely Guardian as well)
Height: Any
Build: Any
Armor: Orrian Legguards aka Grasping Dead Legguards

There is a distinct hole in the back between the leggings and the chestplate. I have tested this with 8 different chest pieces, at 3 different heights and builds, and all exhibit the same problem shown in the screenshot. It is especially noticeable with the Nightmare Cuirass (used for image). You can see right through the model, and it is extremely visible/distracting during any movement, especially while running.

It appears to occur no matter what chest piece is used.

Race: Sylvari (maybe others? I didn’t have anything else to check on)
Sex: Male
Profession: Any light
Physique: any
Height: Any

Armor piece: Exalted Pants

The exalted pants have a bright red backing on the belt buckle that can be seen from the side and slightly behind. Additionally the corners of this backing show through on the lower outer edges of the buckle from the front, and red appears along the seam at the split of the skirt. In the example pictures, the clothing is dyed with enameled sky, deep glacial teal, and sea ice; the red is extremely out of place. I’ve circled it so that it’s more easily visible, however.

Arah Light Armor Set.
Male sylvari necro.
Just need consistency with dyes for helm and shoulders.

This test with Midnight Ice, Bronze, White and Blue Rose.

Human Female
Medium Armor in general

On the right thigh of the Vigil Medium Top’s skirt, there’s this very ugly glitchy area. Whenever there’s movement, the area twists and goes jagged all over the place. This is as best I can put it, honest. Not much more can be said, but it’s incredibly irritating and it has been there since the game came out.

Can this be fixed?

Charr Male
Forgeman Breastplate and practicly any larger greatsword

Roal Ascalonian GS and Twilight are shown in the pictures

Race: Asura
Sex: Male
Class: Thief
Armor: Mist Walker Gloves

One of the vertices on the Mist Walker Gloves appears not to be rigged to the rest of the model. As a result, when my arm moves, that point on the glove sticks out attached to my body.

One of the most highly coveted weapons in the game has this beta old bug that deters many players from forging eternity. Effects that aren’t carried over from Twilight/Sunrise: Warrior, guardian,ranger and mesmer skills which threw Twilight/Sunrise now throw the standard sword(s), burst of darkness/light when drawing or equipping Twilight/Sunrise no longer occurs, downed skills which threw Twilight/Sunrise are now normal (Warrior will throw rocks when downed when wielding Eternity as opposed to Twilight/Sunrise).