Guild Wars 2

Human Female Mesmer

Both the light Heritage Mask and light Baroque mask from the HOM rewards. It clips with this particular hairstyle on the human female.

Other masks either crafted or dropped from mobs don’t seem to have this problem. Just these 2 from the HOM.

SlimChance.6593:

Human Female Mesmer

Both the light Heritage Mask and light Baroque mask from the HOM rewards. It clips with this particular hairstyle on the human female.

Other masks either crafted or dropped from mobs don’t seem to have this problem. Just these 2 from the HOM.

I’d like to say that these helms did not used to clip with that hairstyle before (a little over a month ago was the last time I checked).

Sylvari Elementalist
This issue is an armor clipping problem. First, the mix and match layering with the 42k Karma light armor top (mine is the Light Whispering Garb) and Outrider’s Leggings causing a clipping issue with the top. The top portion of the waistband of the Leggings cuts right into the bottom portion of the front of the top.
Second, the Outrider’s Leggings seem to have some clipping issues with themselves. The bloomer-like portion of them cuts into the back of the skirt when the skirt sways back and forth, and part of the skirt cuts into the back of the one leg as it moves as well. In the screenshot, the leg clipping is pretty obvious, but you kind of have to look for where the bloomers stick out, because they’re the same color as the decoration on the skirt. But you can see a bit of the ruffle just above the decoration, on the same side as where the leg clips into the skirt.
And, just because it’s extremely noticeable on this character, you can see how bad the weapon clipping is with the leggings.

Male Norn with a staff and the Shadow Helm armor piece.

Helm clips with the shoulder art when the staff is drawn (idle combat animation). The poor guy is staring into his shoulder armor.

I’d recommend turning the male Norn’s head slightly in that animation so that the helmet and shoulder art pieces don’t collide if they’re big (which they are on male Norn).

I’m fell into in a waterhole northeast of the top skillpoint in blight arch. I can’t jump back onto the ledge leading down to the water surface; I keep slipping and falling back into the water basin. Please help.

*Update: Nvm- logged out and portaled to solve the problem. However, I was still considered in battle and could not portal out (hence logging out).

Recently discovered this problem on my human thief’s neck. It looks like the face and neck don’t join up properly and a seam can be seen. It may seem like a minor issue but it’s rather annoying and is more prominent in game (these screenshots aren’t that great). I have tried taking off all of my armor and my weapons but it makes no difference so I don’t believe that’s the cause of the problem.

Here’s hoping this is the right place to post this. Last night I finally got a ‘coat’ armor for my thief that wasn’t a coat! Yay! Unfortunately…

!http://imageshack.us/a/img507/1303/gw667.jpg!

!http://imageshack.us/a/img19/5783/gw668.jpg!

No idea how to get the images to show up on the page.

Edit: got some different leggings tonight and that took care of the clipping. So evidently, the clipping shown in my pictures is specific to those particular ‘pirate’ leggings.

there is something sticking out of the mask thats me eye brows

dagger covered by coat

contageous.6037:

Not sure if anyone else has come across this problem while gathering like I did but… Occasionally after gathering with a sickle or a pick axe I’ll see a “Candy Corn” from the Halloween event pop up for like a split second or so in place of the object I just gathered from. So if I just finished mining iron ore, then a candy corn would pop up for like a second and disappear soon afterwards. I don’t have a picture yet but I will try to get one because the way its happens is just too fast and hard to anticipate. Oh right, I haven’t had this problem while gathering with an axe but just with a pick axe and sickle. Hope my description was detailed enough and helps.

i have seen candy corns during my travels never knew candy corns could be so scary

Protean boots (Asuran Cultural armor tier 2) cause Engineer backpacks to appear sideways.

Edit: This also affects visible spine armor like the guild backpack and mad memories books.

Are you ever going to fix the clipping issue with the female winged pants? so far they are the only ones worth wearing.
About the character: female human elementalist,
Clothing: It can be anything or entirely undressed, if you equip ANY winged pants, the stomach gets cut in half, it gets very evident with gestures, and this has been posted before and I cant find an answer
Brackwater hat of the lich
Carrion masquerade mantle of the lich
Valkyrie masquerade rainments of the lich
Berserker’s winged gloves of melandru
Berserker’s winged pants of melandru
Berserker’s winged boots of melandru
attached some images

Edit : Issue seems fixed with Lost Shores update, hope it remains like that. Thanks.

Lionguard and Krytan/Valley Harpoon Guns from PvE cultural weapons vendors do not have the appropriate skins. PvP versions of those same weapon sets do have the correct models, so it’s obvious they exist and should be there for PvE versions too.

Tested only via preview window. Screenshots taken for detail.

Details:
PvP Locker in Heart of the Mists used for previewing PvP Lionguard & PvP Valley skins.
All three Lions Arch Cultural Weapon Vendors used to test Lionguard skins.
T1 Divinity Reach Cultural Weapons vendor tested for Krytan skins.

Wearing basic issued PvP heavy armor in Heart of the Mists.
Wearing level 80 Knights Vigil heavy armor of the Soldier in PvE areas.
Human male warrior.

Same results wearing other sets of armor.

Female human masquerade armor bug

There’s a bug on my new armor between the legs. I saw it first when swimming then i noticed it appears almost all the time. Here is some screenshots showing it in detail.

Please do something, it’s the best looking armor I found at the moment and I’d be very disappointed if I had to change it for that reason.

Anteros.2698:

Are you ever going to fix the clipping issue with the female winged pants? so far they are the only ones worth wearing.
About the character: female human elementalist,
Clothing: It can be anything or entirely undressed, if you equip ANY winged pants, the stomach gets cut in half, it gets very evident with gestures, and this has been posted before and I cant find an answer
Brackwater hat of the lich
Carrion masquerade mantle of the lich
Valkyrie masquerade rainments of the lich
Berserker’s winged gloves of melandru
Berserker’s winged pants of melandru
Berserker’s winged boots of melandru
attached some images

I just made a short Video Clip of this Issue.

http://youtu.be/3rMfjCHbjIM?hd=1

Didn’t realize this thread was up, now I feel dumb for sending it in game. There is a pair of medium leg armor that shows up as a display pic as gloves. Sadly putting them on doesn’t put gloves on my lower torso. I don’t know which is the display bug, the fact pants have gloves as their inventory picture, or that when I put them on I’m not wearing glove pants. Anet, I think there is a great opportunity here.

Race/Gender: Female Asura.

Class: Elementalist.

Clothing: any version of the crafted Winged Pants.

Bug: clipping in the back part of this item.

Red part in this screen shot.

Race/Gender: Female Asura.

Class: Elementalist.

Weapons: most one handed/two handed weapons.

Bug: they are to close to the body and clip into most clothing. Backpacks are also to close to the body.

Second screen is me fully clothed in the winged set with those two daggers in the first picture equipped. It does not matter clothing, majority of one hand weapons cannot be seen on Asurans and has been like this since they were introduced in beta.

Scale armor on the human female has a gap between the chest piece and the leggings as seen in the link below.

http://s162.beta.photobucket.com/user/Putravus/media/ScaleArmorGlitch.jpg.html

This is a level 31 Human Female Guardian wearing crafted level 30 Scale Armor.

This does not show up on the Norn version of the same armor as there is a wide belt that eliminates the gap.

I did a quick search to find out if this problem had been reported yet (on this forum and using Google) but didn’t find anything. So here goes.

Female Norn Warrior.
For a while I’ve been saving gold to buy the Stag Chausses from Valdsam [Cultural Armorsmith Tier 3]. When I previewed the armor piece on my character, it seemed to clip through the character model. I assumed it was a preview issue since some shields clip on the character’s back when previewed as well. So I ignored it and kept saving gold.
Yesterday I finally gathered enough money, so I went and bought them from the NPC.

Unfortunately, they clipped as well. Keep in mind they aren’t clipping with other armor pieces or weapons. The graphic glitch still happens even if I unequip every other item. I’m assuming it’s a problem with the physique I chose during character creation and since I couldn’t find any other people with the same problem, my suspicions were strengthened.

Here’s what I have equipped (although it doesn’t seem to matter):
Level 80 Heritage Warhelm
Level 74 Dolyak Spaulders
Level 77 Trooper’s Armor
Level 76 Mending Gauntlets of the Eagle
Level 80 Stag Chausses (the ones causing trouble)
Level 80 Mad King’s Slippers
Level 80 Clerics Spineguard of the Cleric (probably not the issue as it doesn’t seem to have any graphics associated with it but since some back items do, I decided to include it here as well)

It doesn’t always clip, however. It mostly seems to happen when I walk backwards, stand still or use some emotes. When running and attacking it’s pretty much a non issue.

On a related note, the Fellblade and the Ithas Longbow from the Hall of Monuments also clip with the backside of the character, with or without armor, again leading me to believe this might be a problem with the character physique or the way this particular physique interacts with equipment rather than the armor/weapon models being faulty.

I really like this armor piece and, considering it’s price, it’s a shame it has such a noticeable clipping issue. I hope it can be fixed as fast as possible! Anyway, thank you for your time and for the great game! Really enjoying myself!

Early on in the game I realized the two norns standing outside the Hoelbrak Asura Gate in Lion’s Arch had some horrible pixel issues, I assumed it was such a big deal it’d be solved soon, but they’re still there looking as bad as always.

And on another note while I’m here, the Exalted light armor shoes have some pretty bad clipping issues.

Hi there!

Just wondering if this thread is stil active/useful… I mean… ive posted a few art bugs some time ago now but none have been solved. We get to see game bugs fixed in every patch note but no mention to all these art issues. Would be cool to know what’s getting fixed every while and then in the art department.

Wondering if you guys stil follow this thread and stil want feedback.

Human female engineer, equipping Charrzooka – needs scaling!

First pic on flat surface, showing the ’zooka is far too big. Next two show by how much – I have to stand next to a drop to get it to show

I’m having a problem with my mini-map. I can’t seem to move it back to its original position which was down in the lower right hand corner of my screen. I can still resize the box but it will not “undock” itself from the upper right hand corner of the screen like it did when I first moved it. Is there a mini-map restore/default setting that I haven’t seen?

Norn Female Necromancer

I run on high textures/best texture filtering/high res character textures.

The PvP Dry Bones/(PvE)Shadow leggings are incredibly grainy and low-resolution compared to the other pieces of the set. I have looked at it on several different races, and the leggings always stand out as being grainy.

Armor/clothing art issue

Human female necromancer.

After a few minutes of playtime the Mending Chestpiece of Mercy (story reward) loses part of it’s shoulder/back texture. It looks like a layer of cloth vanishes and a metallic surface with red triangles on the back and on the shoulders becomes visible. The metallic effect might be a result of my current secondary colour for this armour piece.

I could not reproduce what exactly causes this. I have observed it happening with and without getting into fights, swimming or dying. Sometimes it happens after a few minutes, sometimes it only takes seconds. Un-equipping and re-equipping the item fixes the bug temporarily.

The item is trasmuted. I can unfortunately not remember if the bug already happened with the original item.

Equipment: Cleric’s Barbaric Coat, Carrion Barbaric Gloves, Cleric’s Barbaric Legplates, Berserker’s Reinforced Scale Boots, Berserker’s Mace of Water, Cleric’s Shield.

Problem: My character’s right leg clips through the leg armor. The glitch can get a lot more obvious during certain animations, including the one of the idle ones.

Info: Character’s body type was the one on the lower-left corner of the list box in the character creator.

(I actually posted about this bug earlier but I only had screenshots of the character creator and I never saw it on another character so I wasn’t sure it was a real bug. Now I’m confirming it with a real screenshot.)

I’m a Human Male Guardian, and the Greatsaw’s vents clip horribly into the character model when its sheathed, completely piercing through/severing the arm. In addition to that there’s some minor clipping with the vents breaking through shoulder armor.

Human Male Mesmer
Problem with Berserker Acolyte’s coat and Vigil leggings:
When both of these items are equipped at the same time, they do not meet each other at the waist line and it looks as if the character has been sawed in half.

Skritt Hill in Lornar’s Pass just south of the vista, the map appears incomplete.

My ghastly shortbow NEVER glows !!!

!http://i8.photobucket.com/albums/a9/loggahead/gw222.jpg!

Duelist armor has a red line down the center of it no matter what color it is dyed:

!http://i8.photobucket.com/albums/a9/loggahead/gw369.jpg!

and adding exclamation points to the beginning and end of a url does not diplay the picture in forums…

Vigil Leggings – Prowler Boots and Outlaw Boots clipping bad on human female (thief)

-Sylvari, female, thief
-FirstBorn coat( transmuted lvl 80)
-nightshade leggings ( lvl 60)
-First Born boots ( lvl 80)
- Molten dagger (lvl 80)
- Warden Dagger (lvl 80)

the main problem I’m having is that any type of legguards I preview or put on with the boots, the legguards are clipping out of the boots. the only leggaurds that doesn’t distort the boots are the firstborn legguards. as for the daggers they are just clipping through the coat with any dagger though. thanks in advance for the help

Race: Human
Sex: Male
Class: Guardian
LVL: 80
Armor: Noblemans Armor set (Caudecus Mannor Dungeon Set) lvl 80
Issues:
a- Bad clipping on the belt
b- Bad clipping on the back and front of the shoulder pads.
c- Bad clipping on the back “tail” of the armor, leg piece just cuts through.
d- Texture is cut in one of the upper arm parts.
e- Texture of the whole armor is bad and inferior to the texture quality of the same armor while being used by NPCs (comparable in attached file). The NPC’s Nobleman armor set is smooth and shiny, new and not worn off. The one we get isnt shiny, its covered in black patches that look like a bad imitation of “rust” and worn off.

For more information check the attached file with several screenshots showing each and every single one of the points listed. Please fix it, it’s a dungeon armor set that takes a lot of time and effort to get, it would be nice to have it as it is shown by NPC’s without all the bad clipping issues that it presents all over.
Thanks

Wafflecopter.6398:
Protean boots (Asuran Cultural armor tier 2) cause Engineer backpacks to appear sideways.
Edit: This also affects visible spine armor like the guild backpack and mad memories books.
(couldn’t figure out how to quote, so I just pasted)

It’s actually the whole set, not just the boots that seem to cause this bug. I took the whole set off and my backpack looked fine. I then added each piece separately just to make sure, and sure enough, each one makes it go wonky. This is highly disappointing as I always have a kit equipped. I really like the look of the armor, but this backpack bug is well…bugging me :P If you want screenshots each step of the process let me know, I have them.

Hello. We waited long time for event in Cathedral of Verdance, Ruins of Orr. Although it did not start event that always still contested and bug. Can you fix any bugs? Thank you.

Race: Asura
Sex: Female
Class: Engineer
LVL: 80
Armor: lvl80 exotic god armors (bought from karma merchants in Orr)
Medium Armageddon Mask of Balthazar
Medium Arcon Shoulderpads of Dwayna
Medium Rubicon Coat of Lyssa
Medium Aurora Gloves of Melandru
Medium Mortal Leggings of Grenth
Medium Whispering Boots of Infiltration

Problem: Texture problems (black tearing) when wearing the shoulderpads

http://imageshack.us/a/img706/5756/gw22012111222473442smal.png

http://imageshack.us/a/img820/2830/gw22012111222474727smal.png

It does not occur when the character is neutral stance or when the shoulderpads is not equipped.

http://imageshack.us/a/img854/6853/gw22012111223021174smal.png

http://imageshack.us/a/img819/9199/gw22012111222480831smal.png

Hero panel
http://imageshack.us/a/img842/651/gw22012111222485366smal.png

So I love the Winged Armor, it’s one of my favorite light armors and I’m sure you’re already aware of this issue but there is a seem going around the midsection when worn on a female (human female in my case) that allows you to see right through their body. It seems like something that would be simple to fix it would be really nice if you guys could do something about it..

Shields are in wrong place (too close to back and sometimes inside) in preview for Asura character. In real life all fine.

Hello, i have noticed this little but tedious bug on the mesh of my human female mage character.

There is a gap between objects like hip and abdomen that come out only when wear the winged gloves.

As a lightwave3d user i believe this should be an easy fix with some fast point snaps on the morph applied by the gloves to the character body, so hope to see it fixed soon guys!

Best regards.

People should stop posting those meaningless reports since no one from support never read them it seems, and don’t hope to get an answer from staff either, even though this is a stickied post.

By the way you can stop reporting bugs with the in-game interface too, it’s the same nobody will read your reports, nor write you back. It’s just a cosmetic feature that makes you believe there is client assitance in this game (or at least it is from my experience after posting multiple times).

That’s funny. I get that exact same glitch just by putting on the pants. I can have the other slots all filled by items from different sets but as soon as I put those leggings on I get the ‘cut in half’ glitch.

I’ve seen the pact staff on some characters looking like it is positions too high up when sheathed and when I preview the staff it appears that way as well

Armor art issue – visible seam on stomach

it actually looks really nasty if i dye it dark, the triangle over my ladytree parts looks very similar to a fully grown pubis.

Armor art – Sylvari t1 heavy armor, not all pieces have glow. the coat and leggings have glow, but the shoulders and boots do not. i am hesitant to buy the helm since i suspect it wont glow, and while i can ignore non-glowing shoulders and boots, the helm will look VERY out of place.

Norn Female long hair clipping through shields (probably every single one)

Level 80 PVP Shield

This is a major flaw that really is unacceptable

I know this issue has been up before but the Winged Armor Pants from any grouping causes a cut across the female human body when worn. Not sure if this is currently being worked on but as it stands I’ve had to mix match the look because it is so noticeable. You can see clear through the waistline.

There’s a gap between my Asura Elementalists’ stomach and legs. It wasn’t there before the halloween even but around the time it started this problem started showing.

Shirt: Linen Garment
Pants: Mighty Magicians Legs of Rage

Heindal Cluetron, level 19 Asura Elementalist

“The ground and also walls in mostly “inside” areas have “chess board” lines on them”

Apologies, I can’t attached a screenshot at the moment, but the problem has been adressed before with screenshots by other people soon after launch already, but it stil persists after a number of updates (both game and GFX drivers).

For (I think) mostly people with AMD GFX cards the ground and also walls in mostly “inside” areas have “chess board” lines on them. They will even be visible on your character if you’re standing in one.
Such a pity for such a beautiful game.

Has there been any development regarding this issue?

I have a AMD HD 7950 with the latest beta drivers at the moment.