Issues with character art, weapons, or armor?
(note: used ctrl F on both pages to search for “magitech” but didn’t find this specific combo)
Coat: Human cultural T3 Assassin’s coat
Leggings: Magitech medium leggings
The conflicts, overlapping, clipping, etc. on this combination is not only a conflict between the top and leggings, but also the leggings with the structure of the body model itself.
To start: The skirt part of the Magitech leggings clips through the sides of the hips where the thighs join the hip (this happens on the right and left side of the models)
Second: There is a lot of overlap between the T3 assassins coat and the Magitech skirt.
Race: Sylvari
Sex: Male
Class: Elementalist
Armor: Any Invaders Light Armor Leggings.
The preview shows that my character isn’t wearing any pants but is wearing the mantle around it. I have not bought the armor only because I don’t want to have my character running around without anything underneath.
On my Human Guardian I have the Arah chest equipped. Any greatsword I wield has a clipping issue where the spine on the chestpiece goes through the sword.
It does the same thing on my Norn Warrior. (Attached image) http://img208.imageshack.us/img208/7043/z00c.jpg
(edited by Godric.5649)
Weapon Art issue~
Engineers throwing their shield while having the Flameseeker Prophecies equipped are seeing a wooden shield as the projectile.
This weapon/class combo needs to have the same courtesy applied to it as the greatsword/guardian and many, many other combinations where the Legendary is respected by the skill.
I wonder what your basis for comparison is…”
- Jareth, King of Goblins.
Weapon Art issue~
Engineers throwing their shield while having the Flameseeker Prophecies equipped are seeing a wooden shield as the projectile.
This weapon/class combo needs to have the same courtesy applied to it as the greatsword/guardian and many, many other combinations where the Legendary is respected by the skill.
I second this. Attached are some recent screenshots of this strange anomaly.
Race: Any*
Gender: Any*
Profession: Engineer
Weapon: The Flameseeker Prophecies
* = Assumed. So far, all the Flameseeker wielding engineers who I have bumped into on Sanctum of Rall have been strangely human female.
I am Fleeting Flash, in-game dungeon cosplayer of Reddit Refugees [RR] .
(edited by Ari Kagura.9182)
I have a Female Asura Mesmer dressed to match the different shades of pinks, purples, and blues traditional to the Mesmer. Except I noticed that my HAIR RIBBON is different now than it used to be. It is a DARKER purple, and the little decorative square is normally pink. It is now GOLD. I checked with another player with the same ribbon… they noticed it too. I checked my Total Transformation Kit, and ALL of the ribbons have a gold square now. And there is another purple in the Kit that is probably a better match than this is now.
See the picture: The pink and purple of my shoulders and hood were almost a perfect match to the colors in my hair ribbon. Now the ribbon is a shade or so darker, and the square is gold.
Please fix!
P.S. – All of the hair accessories for every race and sex need to include a true black (Abyss) color! The world would be less colorful, but you would have fewer people after your heads to make hair accessories dyeable. (But yeah, they are right. Hair accessories need to be freely dyeable. We are locked into an armor color for life.)
Set a man on fire, and he’ll be warm the rest of his life.
– Unknown Fire Elementalist
(edited by Hamfast.8719)
The Shard of the Deep appears upside-down when stowed. This is only from the item preview. I have not actually equipped it yet, (I am still deciding whether or not to Soulbind it) so am not certain if it is also upside-down in actual game play. Two pics… one wielded, and one stowed:
Set a man on fire, and he’ll be warm the rest of his life.
– Unknown Fire Elementalist
Charr T3 medium cultural, chest armor, both genders.
There is a hole in the left arm and a constant red line down the center of the chest.
Race : Charr
Sex : Male
Class : Guardian
Armor : Primeval Armor Skin (Gem Store)
The helmet clips with my character’s chin/beard.
Race: Norn
Sex: Female
Profession: Thief (medium armored)
This is an issue with the T3 medium cultural armor vest. I’ve chosen the thickest and most voluptuous figure available for female Norns and apparently my hips and stomach clip through the leather of the vest (as seen on both screenshots). On the first screenshot, I’m not wearing leggings or gloves to show that it’s solely the vest that clips into my character. On the second screenshot I’m including my medium vigil leggings to show that the vigil leggings clip horribly into the T3 cultural armor vest as well.
Please fix this ArenaNet, I’ve been waiting so long for a fix to this issue and wearing this to battle, or even in town, is embarrassing because of the clipping. Cultural armor shouldn’t be clipping on the races they’re supposed to be worn on.
Thank you!
Not sure if this is the right place to put this as it’s not a player Char graphic but I can’t seem to find where else to put it. Basically since the patch that removed culling from PVE any ghosts I see in the game no longer look like ghosts. The pic I will post here is an example of a fighter in Ascalon and all other ghosts of similar type have lost their “ghostly” look/aura thing as well just like this one.
If it’s just a settings thing please advise if I can fix this by which setting to play with. Mind you I had no problems with this before the patch as mentioned above.
Race: Human
Sex: Female
Profession: Necromancer (light armored)
This hairstyle clips with the Acolyte’s Mask.
Human Male Ranger
My Falconers gloves are clipping rather noticably with my Invaders Rawhide Vest. Or rather, just the left one is. (Weird :o)
The helmet, chest, legs, and shoulders are Exotic Lvl 80 Invaders Rawhide Medium from WvW, obtained with badges and gold. The gloves and boots are transmuted Falconer’s human cultural armor, obtained from the human tier 2 cultural armor merchant in Divinity’s Reach.
(edited by Shoe.5821)
Race: Sylvari
Sex: Female
Class: Elementalist
Problem: Lighting textures on Sylvari Tier 3 Cultural Light
Pretty much ever since the effects update recently the lighting on the shoulders and gloves, and parts of the boots has gotten really shiny and strange. I know the texture on those pieces was different then the rest of the armor. But it looks very strange and unnatural. You can see almost no color because of the glare on them.
First two pictures are Day/Night. It shows at all angles, but these two screenshots are just an example. Last screenshot is what it looked like before the issue.
Problem does not persist in the Hero panel or anything. Everything looks fine on that. It is just the general in game lighting everywhere.
I’ve tried changing post processing and anything that would affect lighting and nothing seems to help so I’m not sure if its a issue on my end of just the games lighting.
If anything, maybe make a way to disable/change the lighting effects in-game. World lighting in general looked a lot better before to me. :/
(edited by Katreyn.4218)
Asura, female, elementalist.
The light Asura cultural Tier 3 set (savant) has a “bug” with the coat of the set. Equipping it will hide your shoulder armor. While this is a feature on some armors, it also hides the T3 savant shoulders of the same set.
Note that this was “fixed” a few patches ago by making the chest automatically include the shoulders, but merely lasted a short while before being returned to the current state
Pic 1. Savant chest + Savant shoulders. Shoulders not showing.
Pic 2. Cathedral of Flames chest + Savant shoulders. Shoulders showing.
Pic 3. No chest + Savant shoulders. Shoulders showing.
Pic 4. Savant chest + Hellfire shoulders. Shoulders not showing.
Pic 5. Zojja showing how it’s done. Sadly not sharing the secret.
today’s patch was hoping it would of solved the problem with one of the legendarys well I was dead wrong.
Bolt has problem after/during a attack animation in which case it doubles itself inside of it or after attack swing and quick swap you’ll see it float in the air for about 3 seconds.
norn female guardian.
I’ve also seen other races have the same problem
I am not sure if this is the right thread for this, but i couldn’t find any better.
The icon of Fellblade is still not a Fellblade icon.
-Kudzu
I am not sure if this existed before the patch but I only just noticed it after the September the third patch.
The projectile is actually Kudzu itself for a split second, see attachments.
http://www.youtube.com/watch?v=94vkur8nA_o
As a sidenote please just remove the string on Kudzu it looks so out of place. It also doesn’t show up in the preview screen so it is misleading and I was very disappointed when I got mine. It annoys me a lot more than it should and I would rather have the gold than have it with the string.
(edited by zELEVENz.6937)
Charr, Female, Guardian
My snowwhite charr suddenly has a black patch on her forehead. I’m pretty miffed at this, she was to be as white as snow. Now it even looks like her hair is pasted on with a black splotch on her face. This happened since the last patch of a few hours ago (3 sep).
Please get this right again!
(edited by viv.1892)
Race: Charr
Sex: Female
Class: Engineer
Armor in question: Vigil Medium Coat
So, I logged in after this last patch to check if there were any progress on the Vigil/shield issue I’ve been posting about since late January. And indeed there was; the shield is no longer horizontaly implanted into my Charr’s elbow. HOWEVER.
Now her flesh stands on end on both arms, and it looks terribly disturbing when moving around.
Part Charr, part porcupine.
Edit: here’s a video of it in action. http://youtu.be/Ch-f9qU06vs I hid the shoulders and gloves to show it.
(edited by Noxin.5602)
Race: Human
Gender: Female
Class: Mesmer
Weapon: Bolt
Bolt is bugged in two ways:
1: Duplicate sword at my feet when I run
2: Duplicate sword in my hand after I attack, sword skills 1 and 2 as a Mesmer.
(edited by Benhudds.1934)
Back again.
Ok this is pretty severe. Post-it to your monitor as high priority.
Female Norn (class any, gear any), the hair style in the image is bugging pretty nasty. Idle it’s looks normal, but when moving (even the slightest inch) it instantly distorts to some frozen spaghetti curtain.
I first figured it was some economical measure but it happens even on highest settings.
(edited by Jamais vu.5284)
Race: Norn
Sex: Male
Class: Ranger
The nose clips through the Tier 3 Norn Cultural medium armor head piece. The item is called Wolf Mask and is attained from the cultural armor vendor in Hoelbrak. I love this armor and I just wish this one issue would be resolved so I can love it even more. Thanks for your help.
Race: Human
Sex: Female
Profession: Mesmer (but applies to all light armor)
Armor: Conjurer Chest and Whispers Leggings
This cuts off my characters at the waist. Similar to the winged set a long time ago. Each piece by itself cuts the character in half but when combined, it looks worse. Hard to see the cut line in the screen cap but I assure you it’s there.
I didn’t equip it on my character, only previewed it. Don’t want to buy something that cuts me.
Race: Human
Sex: Female
Profession: Mesmer (but applies to all light armor)
Armor: Winged gloves, Feathered top and Stately shoulders
You can see the arm part of the Feathered top go right through the Winged gloves.
The Feathered top also cuts through the Stately shoulder on the right side (character’s left).
Thanks again, folks! Keep ’em coming.
I have a male sylvari ranger with a Sovereign Greatbow that clips horribly with his Oldgate Coat.
Sorrow’s Furnace Commander
“You’re the mount, karka’s ride you instead, and thus they die happy!”-Colin Johanson
(edited by EnemyCrusher.7324)
Race: Norn
Sex: Male
Class: Warrior
When using legendary weapon the Juggernaut my armor (shoulder and hands that I have received for achievement) it looks like crap.
So please fix this because this is problem for the the moment you presented this armor.
Server: Piken Square
Meteorlogicus has a lot of issues since the last patch.
1. It does not glow when sheathed during the daytime (this looks bad). It only glows when sheathed at night.
2. The blue/purple trail is missing… unless you log in during night time, in which case it is there until you use a weapon skill or unsheathe.
https://dviw3bl0enbyw.cloudfront.net/uploads/forum_attachment/file/101387/gw248.jpg
3. The clouds take too long to form after the lightning bolts, which is visually distracting. In general, I think the footsteps are a bad idea since they are vertical and three dimensional— its a lot of visual noise right in front of your screen. All other footsteps are on the ground so they are not distracting or disorienting visual stimuli.
4. The clouds are black during daytime, which doesn’t make sense with the white cloud/Sunny Aesthetic. In general, the footsteps only seem to match the night time appearance and perhaps should be made night only.
5. Most players honestly don’t like the aesthetic decisions made in this patch. I’m of the opinion that you guys should really change it so that there are two versions of Meteorlogicus:
One with the current day/night cycle and footsteps, and one that stays blue/white/sunny at all times, with no footsteps.
http://www.guildwars2guru.com/topic/84416-guide-minmax-dungeon-groups-with-any-class-composition/
(edited by Hamartia.3421)
Also, Zenith weapons (longbow, shortbow, etc) are no longer giving the dark blue electricity movement effect as of the first September 3rd patch.
http://www.reddit.com/r/Guildwars2/comments/1luo9x/electric_effects_removed_from_zenith_bows/
http://www.guildwars2guru.com/topic/84416-guide-minmax-dungeon-groups-with-any-class-composition/
Race: Norn
Sex: Female (heaviest, non-muscular physique)
Profession: Thief
Armor: Magitech (gem store)
Description: The skirt clips horribly into the character and bares much skin, which was not present around three weeks ago when I last played. It does this even without wearing any other armor pieces.
[SoX] Standard of Heroes
Jade Quarry
Race: Asura
Sex: Female
Profession: Necromancer (light armored)
In this set of armor I’m using the light leggings from the Crucible of Eternity dungeon and there’s a piece on the back that cannot be dyed.
Here’s another on the same asura, but it’s an issue with the T1 cultural armor leggings. Her knee clips through the fabric during her idle animation.
Race: Norn
Sex: Female
Profession: Thief (medium armored)
This Norn uses the heaviest body preset and her butt clips through both T1 and T2 medium cultural armors.
Race: Human
Sex: Female
Profession: Mesmer (light armored)
On the first screenshot I’m wearing the light leggings from the Order of Whispers set. An opening appears showing my character’s underwear (dyed with Icing dye) underneath the leathery belt that holds the leggings up.
On the second screenshot I’m wearing the light top from the Crucible of Eternity dungeon and the light shoulders from the Caudecus’ Manor dungeon. The idle animation makes her shoulders look like that.
Thank you!
Edit: Friend pointed out a seam while wearing the Order of Whispers leggings, thank you Rusey! (3rd screenie)
(edited by Jovel.5706)
Oops, made my own thread but I guess I’ll stick this here.
Race: Norn
Sex: Male
Class: Warrior
Backpiece slides off back as shield is wielded then snaps back onto back when shield animation finishes. Reverse also happens during stowing. Same thing happens with all my other back slots.
Note: the shield being at a weird angle is purely due to the animation of the shield and is not another bug.
(edited by Player Character.9467)
Several Clipping Issue
Armor/clothing art issues (textures, placement, clipping…)
Race: Sylvari
Sex: Male
Profession: Thief / Ranger / Engineer
Armor Set: Tier 3 Sylvari Cultural Medium Armor (Firstborn Shoulderguards) + Any Fractal Backpiece
Description: The fractal backpiece is buried inside the shoulders’ leaves, making it impossible to see it glow.
I expected Cultural Armors to be the Armors most polished, considering they are the most expensive. That, couple with the most expensive backpiece makes for a very disapointing clipping issue. Please make me and the other Sylvari Engies/Thieves/Rangers happy.
Screenshots:
(edited by Quickfoot Katana.8642)
On my male Norn Elementalist, the Devout Helm has some clipping issues with my head. See attachted screenshot.
Race: Sylvari
Sex: Male
Class: Ranger
Armor: Cultural Tier 3 Shoulders and Rox Quiver
Issue: The tier 3 cultural shoulders hide parts of the quiver and i don’t like it, i’ve spent a lot of money on them :S
Attachment:
Andúnë Faroth, level 80 sylvari ranger.
Race: Sylvari
Sex: Female
Class: Necromancer
Weapon: Ascended dagger
Armor: T3 Cultural
Hi, I just crafted the asceded dagger for my necro and after spending tons of gold on it, I was disappointed to see how badly it clips with my expensive T3 armor. I am a scepter/dagger necro, so when the dagger is equipped offhand, it is hidden under my armor half of the time. I love the design of the weapon and I would love to show it off a little more. Please fix it, I am sure most necros will get this dagger and it will be a pity to have such an expensive weapon not visible.
Thank you.
Species: Asura
Gender: Male and Female
Class: Medium Armor
Item: Auxillary Powered Boots (Asura Cultural Tier 2 Boots)
Issue: Incorrect Dyeable Area Inclusion
Description:
The boots contain two dyeable areas:
- Upper Dye Slot = Back of boots
- Lower Dye Slot = Front of boots
However, the upper half of the front of the boots that should be tied to the Lower Dye Slot (front of boots), is incorrectly tied to the back of the boots (Upper Dye Slot). This issue leads to incorrect dying of the item.
ALSO
All of the “Auxillary Powered” items have “Auxiliary” spelled incorrectly.
| [Free Ports For All “Not So Secret” JP Needs (and 1st Try Dive Tips)] |
| [Classic Thread: “all is vain”] |
Items: All of the Asura Cultural Tier 3 Medium ‘Prototype’ Armor
Issue: Incorrect Item Icons
Description:
All of the Asura Cultural Tier 3 Medium ‘Prototype’ Armor has generic icons instead of custom icons like other cultural gear. Would Maryeli happen to have time to create some beautiful icons for the gear?
| [Free Ports For All “Not So Secret” JP Needs (and 1st Try Dive Tips)] |
| [Classic Thread: “all is vain”] |
(edited by StinVec.3621)
Items: ALL TIERS of the NORN Cultural HEAVY Armor
Issue: Incorrect Item Icons
Description:
All the HEAVY armor tiers of NORN Cultural Armor have white/stock/generic icons which in these times of salvaging for Essences of Luck makes it very tedious to ensure you don’t salvage the wrong item.
Refer to GW2 wiki to see the icons currently in use:
http://wiki.guildwars2.com/wiki/Norn_cultural_armor
Seamarshal Belit / Initiate Xun Tsu / Mistwarden Roshone
Seafarer’s Rest | Northerner @ Dragon Season
all bows looks nasty now with the string. ew .. get rid of it please.
Race: Human
Sex: Female
Class: Ranger
clipping gloves (radiant skin) x chest armor (WvW skin)
Race: Norn
Sex: Female
Profession: Warrior (heavy armored)
This character is also using the heaviest body preset for female Norn and her butt clips right through the skirt from the craftable “Barbaric” set.
Race: Charr
Sex: Male
Class: All
Lower pair of horns for this style deform at large scaling.
They look normal [mirrored] up to about 3/4 full size, then one curves inwards while the other continues outward.