Guild Wars 2

Asuran/Female/Necro

The ascended scepter Occam’s Wand of Force is clipped by the TA Nightmare light armor set. Pictures attached.

Race: Sylvari
Sex: Male
Class: Necromancer
Equipment:
Flame Legion Mask
Corrupted Orrian Mantle
Corrupted Orrian Vestments
Flame Legion Gloves
Flame Leg Guards
Flame Legion Shoes

(all from dungeon vendors)

The error here is either in the Corrupted Orrian Vestments or the Flame Leg Guards. At the part where the two pieces of equipment connect at the waist, there is a gaping hole.

Armor art issues:

Race: Human
Sex: Female
Class: Mesmer

The Order of Whispers Leggings clips severely on uneven terrain and/or on inclines (typically when one foot is placed higher than the other).

Weapon art issue:

Race, Sex, Class: same as above

The Ascended Focus when stowed the handle is embed in the characters leg.

Vael.8796:

Item: Aetherblade light gloves
Race: Female Sylvari

Issue: when used with the Nightmare Vestments from the Twilight Arbor token,
half of the texture is missing / replaced with red.

Just wanted to expand upon this post, the gloves have been bugging me a lot and so I’ve taken the liberty of doing a few tests with ’em! :P

—

Aetherblade Light Gloves [&AgHaKwCAi6cAAA==]

Race: Sylvari
Gender: Female
Class: Mesmer

Problem: In general, the top part of the fabric that covers the back of the hand is properly textured, while the lower half that covers the hand seems to take some of the texture from the chestpiece worn.

+Exalted Coat -> Leathery texture, like the normal chest cover (No.1)
+Feathered Vestments -> Feather material (No.2)
+Masquerade Raiments + Acolyte Coat + No coat worn -> Works! Seems to break when the forearm part of the glove is removed by the chestpiece. (No.3)

It also seems to take dye from the main dye slot on the chest. (No.4)

Race: Human
Gender: Male
Class: Mesmer

Acolyte’s Coat [&AgGDAAAA] + Masquerade Mantle: [&AgEcFQAA] = clipping.
Video

(plust hair clips a lot while running)

Race: Human
Gender: Male
Class: Mesmer

Even if hair clipping is considered a minor issue I would still point that Acolyte’s Mask [&AgG4FQAA] clips with a lot of hairstyles even new ones from the gemstore :S
Video

Race: Human
Sex: Female
Class: Engineer

Equipment: Shaman Reward Breastplate (CoF medium) + any Shoulder

If I equip any shoulder piece with this chest, the shoulders won’t appear.

Hey all, after July’s update, all my human female faces have their eyes popping out of the sockets and this includes the character creation as well.

https://dviw3bl0enbyw.cloudfront.net/uploads/forum_attachment/file/94105/scary_eyes.jpg

This is a screenshot of what I’m talking about

Lou.4759:

Race: Charr
Sex: Female
Class: Thief

I think I win this “contest”

This happened to my character after the patch on 8/20/2013. The character model gets spikes sticking out from the back and arms of the character model. The issue only occurs when using the Vigil coat and no other.

I dunno, I see alot of clipping issues people are bringing up, tho I see this as much more severe since the whole character model gets screwed up and have been so for a month making the whole character look ugly. And since I see clipping issues being brought up that have been in since launch and haven’t been adjusted yet I get a bit worried that this is something that ain’t gonna get fixed within a year.

Lou.4759:

Lou.4759:

Race: Charr
Sex: Female
Class: Thief

I think I win this “contest”

This happened to my character after the patch on 8/20/2013. The character model gets spikes sticking out from the back and arms of the character model. The issue only occurs when using the Vigil coat and no other.

I dunno, I see alot of clipping issues people are bringing up, tho I see this as much more severe since the whole character model gets screwed up and have been so for a month making the whole character look ugly. And since I see clipping issues being brought up that have been in since launch and haven’t been adjusted yet I get a bit worried that this is something that ain’t gonna get fixed within a year.

Your issue has also been reported by many others, so it isn’t just happening for you and isn’t related to a graphics driver issue or anything.
Here’s one report of it, and another, which also has links to other reports of the issue.

You’re right, I would think this would have been addressed by now, just as the pair of pants that had an extra glove floating next to it was addressed. Shouldn’t be more than a minute or two to adjust the nodes for this chest piece on the charr model. The time it takes to get a cup of coffee or use the bathroom could instead be used to fix this Order Armor regardless of where it is on the ‘priority’ list.

Race: Asura
Sex: Male
Class: Medium Armor (Engineer)
Category: Armor art issue

Description: Medium male Priory Boots (bought from armor guy at Durmand Priory, transmuted to crafted exotics) have large portions, which are non-dyeable. These spots are plain red, regardless of the used dye color. I used different dyes on my screenshots to show the spots better. The problem happens in hero screen as well as on the character model ingame.
Also, the side toes clip out, but I guess that can’t be fixed.

Everything was alright when i bought the boots a while ago. It broke in an update some time ago, I’m pretty late with reporting it…hope it can be fixed in a future patch!

flaRe.4092:

Race: Asura
Sex: Male
Class: Medium Armor (Engineer)
Category: Armor art issue

Description: Medium male Priory Boots (bought from armor guy at Durmand Priory, transmuted to crafted exotics) have large portions, which are non-dyeable. These spots are plain red, regardless of the used dye color. I used different dyes on my screenshots to show the spots better. The problem happens in hero screen as well as on the character model ingame.
Also, the side toes clip out, but I guess that can’t be fixed.

Everything was alright when i bought the boots a while ago. It broke in an update some time ago, I’m pretty late with reporting it…hope it can be fixed in a future patch!

Would you try to use Dye Remover on all parts of the item and save the changes and close your Hero panel and see if it fixes it. You should then be able to go back in and dye to your liking.

If that does not work, could you try un-equipping all other armor items and then trying to use Dye Remover on the item. These methods have helped resolve the ‘undyeable after transmutation’ issue for others in the past.

StinVec.3621:

Would you try to use Dye Remover on all parts of the item and save the changes and close your Hero panel and see if it fixes it. You should then be able to go back in and dye to your liking.

If that does not work, could you try un-equipping all other armor items and then trying to use Dye Remover on the item. These methods have helped resolve the ‘undyeable after transmutation’ issue for others in the past.

Thanks for your suggestion, I am now a naked asura (with blue underpants), but unfortunately, still with red shoe tips.

I then tried to preview Priory Boots at the PVP Locker, these have the problem as well.

I asked another player to confirm the problem to see if it is only on my client, but he also sees red shoes.

flaRe.4092:

StinVec.3621:

Would you try to use Dye Remover on all parts of the item and save the changes and close your Hero panel and see if it fixes it. You should then be able to go back in and dye to your liking.

If that does not work, could you try un-equipping all other armor items and then trying to use Dye Remover on the item. These methods have helped resolve the ‘undyeable after transmutation’ issue for others in the past.

Thanks for your suggestion, I am now a naked asura (with blue underpants), but unfortunately, still with red shoe tips.

I then tried to preview Priory Boots at the PVP Locker, these have the problem as well.

I asked another player to confirm the problem to see if it is only on my client, but he also sees red shoes.

Ah. Sorry to hear that. I was hoping it was only the ‘transmute makes undyeable’ bug and not a ‘red undyeable shoes’ issue reminiscent of the ‘Order of Whispers Red Daggers’ issue.
:\
I hope this can be addressed quickly. Seems the Order Armors have a frequent issue of having issues.

Subject: Bald spots with the new female norn “Lagertha” hairstyle.

Race: Norn
Sex: Female (height setting at max)
Profession: Mesmer
Armor: Phoenix Light

There are some bald spots showing where the hair seems to be disappearing into the head. This only appears when the character has drawn her weapon as you can see in the screenshots below. When the weapon is sheathed the issue is gone.
I tried different stances/weapons and all have te same issue.

Race: Human
Sex : Male
Class: Mesmer

Equipment: Vigil Leggins (light armor)

There is a texture problem with my Sorcerer’s Shoes while wearing the Vigil Leggings. Then I tried several other boots on and it seems to be that most of the long boots have this kind of problem.(Zhed’s boots, Ascalonian Shoes) so I thought it was caused by the Vigil Leggings.

The oldest, known, clipping bug in the history of GW2 is still here.

Race: Norn
Gender: female
Weapon: any offhand weapon

Attached is a screenshot that I posted on this forum in May as well. This was the link.

https://forum-en.gw2archive.eu/forum/support/bugs/Extreme-clipping-with-fused-dagger

Yea, my fused dagger is inside my knee. Any off-hand weapon will be inside your left knee. People that wield Howler on their female Norn have reported this for months and months. Most of the time, they can’t see their legendary because it’s inside their leg.

Race: Sylvarii (as I remember every other get this too)
Gender: male
Class: Thief
Weapon: any one-handed weapon

Anonymity Hood has a weird texture bug making your character have “elvish ear” on the right of your head. Especially visible while wielding a weapon or in combat.

While not a ‘gap’ like we’ve seen in the past with some combinations, there is an eye sore seam at the midsection when wearing a Conjurer’s chest with Whisper’s legs (light).

Female Norn Arm Deflates During Drawn Rifle Idle Animation
Gender: Female
Species: Norn
Item: Any Rifle

Description:
On a female Norn, during the idle animation with any rifle drawn the upper arm deflates and then inflates.

• Character: Female Norn Arm Deflates In Idle Rifle Animation
  | INFO | Report Thread |

Charr Leggings Waist Node Tugged Down
Gender: Female and Male
Species: Charr
Items:

• Charr Cultural Tier 2 Medium “Wrangler Leggings”
• Exotic “Duelist” Leggings
  • Aidan’s Leggings
  • Nika’s Leggings
  • Shiro’s Leggings
  • Vaatlaw’s Leggings
  • Zho’s Leggings
  • As well as the other 14 Exotic Duelist Pants

Description:
At the waist it appears a node has been tugged down which opens up a large see-through area.

Race: Asura
Sex: Female
Profession: Mesmer
Armor: Savant Coat and Invaders Acolyte Cowl

Since both the helm and coat hide whatever armor is in the shoulder slot, it causes some weird issues on the coat. If you look at the screenshot, you’ll notice the ring around the shoulder gem has a red square around it and other parts of the coat have turned red.

- Charr
- Both genders
- Any height

Dreadnought Tassets
Animation of left hip plate after jump with greatsword breaks, pausing at an obtuse angle and instantly resets after. Presumably, broblem not only with these pants.

Race: Human
Sex: Male
Class: Thief
Issue: Armor – Vigil Mask

The medium-armor Vigil Mask clips into my thief’s forehead, which I attempted to remedy with a Total Makeover Kit. It worked, but in order to do so I had to set his brow thickness and eyebrow placement quite low on the scales, which made him look like a bit of a thug if I hid the mask. Now I’m puzzling with another makeover kit to try making him look a bit more affable, but the Vigil Mask doesn’t offer much wiggle room.

Here’s a shot of my eyebrows eating the Mask!

EDIT: This seems to largely be a problem with my thief’s current face, which is the topmost left at creation. Checking other faces, they seem to be fine with any brow changes!

Race: Norn
Class: Mesmer
Issue: Dislocated camera after using a makeover kit.

Description of the Issue: I have recently used a makeover kit (3 days ago). Just before that, I had the camera fully zoomed in at my character. I shortened her height, changed her complexion, eye color, hairstyle and hair color. After making the changes, the camera was still set on her previous height and relogging did not fix the issue.

Attached are screenshots of my character, zoomed in (front and back), and a fully zoomed out camera from 2 different angles, which didn’t seem to be right (as if she were at a world boss event).

- Charr
- Female
~ 5/6 of max height

Rox’s Quiver
I know that the problem with positioning is hard to correct. But this is a little too, I think. Quiver hovers in the air combined with almost all of armor. Even with the most wide, such as orrian. In my opinion it is better if it is a little “sink” in the character’s model, rather than hang in the quarter of a meter away from him.

- Asura
- Both genders
- Any height

The gap of animation on switch between running forward and stand with a right hand pistol. Animation instantly switches.

Weapon and armor effects issue (glowing items + invisibility effect)

-Sylvari male warrior (happens to any race and gender )
-Glowing items + invisibility effects (in my case: Fractal Hammer and Radiant Vambraces)

As you can see on 1st screenshot, both glowing gloves and hammer have transparent squares instead of item texture when character is invisible. it happens to with every kind of invisibility – mesmer, thief, combofields, even food that makes you ghost-like.

Race: Human
Sex: Female
Class: Warrior
Equipment: Aqua breather, Resilient Krytan Spear. The only thing relevant here is probably that no chest armor is equipped.
Location: Underwater. Screenshot is from Lake Delavan in Queensdale.

Problem description: Taking a swim in Lake Delavan, my character does not want to be dragged down by all that heavy armor. That spear is heavy enough, thank you. However, when underwater, the breasts deattach from the chest. It looks like the character has attached two coconut halves to the chest. This effect is most pronounced when not in combat.

Race: Norn
Gender: Male
Issue: Hair/Beard Colours (Honey Blonde)

When selecting “Honey Blonde” as the hair colour, the results are completely different for the hair and the beard.

Race: Charr
Gender: Female
Issue: Charr Tail clips through Chiroptophobia Greatsword Skin

The tail clips through the center of the sword, it is much worse for this sword than any others I have seen, most just clip around the edge. It is also really noticeable when running on all fours.

I have attached a screenshot of both the problem and the Jade weapon skin for reference. As a recommendation, maybe the Chiroptophobia sword could just be worn at more of an angle so that the tail doesn’t clip through as much?

I was really excited to finally get this sword, and then really disappointed by the amount of clipping.

The last screenshot shown is my Jade Sword, which does not clip nearly as much. You can see that the position of the sword from the tail is much further away.

Charr Engineer (male) fire-animation bug

Charr racial utility skill [Hidden Pistol] unlocks the Toolbelt ability [Hidden Pistols]

The animation for that ability is incorrect as the pistols are held upward and not forward.

Level or equipped weapons have no effect on this skills behaviour.

(As you can see in exhibit B, sometimes even the muzzle flash points upwards)

Race: Norn
Sex: Female
Class: Mesmer
Level: 80

Description: Chest piece chops long gloves.

The gloves issue has been reported for Charr and Asura, adding my Norn to it.

Here you may see that a TA chest piece (white) is chopping off the CoF gloves (purple) to be wrist-and-bellow only. This bug also happens with Radiant gloves, or any long gloves for that matter.

This bug is relatively new to me (past 2 months?), and before it the gloves would render correctly from fingertips to just below elbow, as they were designed.

Race: Human
Sex: Female
Profession: Warrior and Guardian
Armor Set: All items sharing the same model as the Mighty Chain Legs
Description: They seem to lack a connecting line when paired with other items. With no chest piece equipped, they’re fine, but when you equip a chest piece, there’s a line between the top half of the body and the bottom half as if you’re… well… cut in half! It’s a bit disturbing. Wouldn’t bother me so much if it wasn’t so obvious when you ran.
I believe the problem is the fact this model actually sits lower on the waist than the rest of the pants. It probably wouldn’t be so bad if it wasn’t for the fact for the first 30ish levels, there’s 3 different models of pants and this one is the most common of the three.

The right shoulder/arm piece on the asura male model on the T3 cultural CHEST armor.

Seems to be falling apart…

Rage Cube.4573:

The right shoulder/arm piece on the asura male model on the T3 cultural CHEST armor.

Seems to be falling apart…

Okay I found an animation that shows it off a little better. Maybe it will help you see whats actually wrong with the model.

Race: Charr (though presumably any)
Sex: Either
Class: Engineer
Equipment: Slickpack (though presumably any visible back item)

This issue was mentioned before, but it really sticks out with the recent Slickpack item and kits.

When you activate a kit, the backpack properly replaces the back item, but once you use an ability, or get hit, the backpack and the back item merge together. See screen shot:

Human, Male, Ele

Part of the right arm is showing though the sleeve – Shaman’s Conjurer Chest Lvl 80

Race: Norn
Sex: Female (heaviest, non-muscular physique)
Profession: Thief
Armor: Conquest Coat (WvW skin) and Vigil Leggings
Medium Armor

Description: As shown in the screenshot, part of the Vigil pants clips pretty badly into the coat. It is extremely noticeable with contrasting dyes. Many leg armors clip similarly on this physique for female Norns, including Magitech and some cultural armors.

First image:
Race: Charr.
Sex: Male.
Profession: Elementalist.
Armour: Light – gloves – Student.
Issue: The inside of the fingertips lose their texture.
Plus I am 100% sure that you can actually fix the clipping issue with the tail in the Student pants, as it’s a very small skirt and should be adjustable to the tail.

Second image:
Race: Charr.
Sex: Male.
Profession: Engineer.
Armour: Medium – chest- Kodan.
Issue: When you wear the Kodan medium chest armour as a charr your hands are misplaced and are moved away from your arms.

Race: Human
Sex: Female
Armor: Heritage

Probably has been reported before, but this glitch has been in the game since I started playing a few months back and hasn’t been fixed yet. Looks like the character has been cut in two, especially noticeable during the idle animations. If you move the camera and look down you can see right through the waistline too.

Flame Legion Greaves
Nightmare Legguards

Sylvari, Female, Warrior

The pants cut through the boots on the side and on the back of the legs. I absolutely LOVE the combo of Flame Legion boots and Nightmare pants, so I was kinda bummed when I noticed this ugly “hole” in my boots.

Oh, so tis thread exists. Here’s a “few”, some might be repeats.

1. Asura, Male, Light
Issue: Tier 3 chest piece Savant Coat. The “included” shoulders warp along the movements of the metal part of the right arm, most notable in extreme angles. Pretty severe. See fig 1.

2. Asura, Male, Light
Issue: Tier 3 chest piece Savant Coat. Certain combat stances makes the weapon clip through the metal part, it would be solved by having the part rotate along the arm (not only the hand rotates). Pretty minor. See fig2.

3. Human, Female body 2, Medium
Issue: Deuelist Pants (random exotic drop, bought of tp) and Whispers Boots clips in such a way that part of the pants “bulge” out of the boots. Moderate issue. See fig3, colored for your benefit.

4. Human, Female, Medium
Issue: Tier 3 chest piece Assassin’s Coat. In combat knives on sides bend horribly. This could be due to lowered graphics settings (animation). Moderate to Severe. See fig4.

5. Charr, Male body 2, Medium
Issue: Temple Karma Exotic Whispering Shoulderpads. This seems to clip through a good deal of coats, at least both I own, Rascal Coat and Whispering Coat. Moderate, considering all the other problems with Charr I’ll live. See figs 5 and 6, colored for your benefit.

6. Norn, Female body 1, Heavy
Issue: Tier 2 boots Eagle Greaves and Vigil Leggings. Clips through each other just like issue 3. Moderate. See fig 7.

7. Norn, Male, Heavy
Issue: WvW skin Pit Fighter Skirt. Unless I stand on a perfectly flat surface my leg(s) will clip through it. Moderate issue. See fig 8.

Race: Necromancer
Sex: Female
Profession: Necromancer
Armor Set: Wintersday Earmuffs

Description: I’m using the new Asura hairstyle with the two pigtails in the front and long one in the back. The armor over my ears is clipping through to the earmuffs. Usually the earmuffs just hide the ears, but for whatever reason they don’t disappear with this hairstyle.

I’ve attached two screenshots for your consideration. Hope this can be fixed by Christmas, because these earmuffs are adorable!

I currently have a lvl 41 norn guardian, this character has a greatsword for his first weapon set, a sword and torch for the second. As of today the sword is locked as the only weapon I can use in my main hand. I am unable to weapon swap. if I unequip the sword it shows the greatsword in my main hand with the torch in the off hand. with no item equipped in the main hand slot

Race: Human
Sex: Female
Profession: Mesmer
Armor: Embroidered Pants

There’s a cut line on the back of my character around the waist area (none in the front).

Hellfire Vambraces have weaker glow on charr and norn compared to other race since October patch

Same bugg as Lou.4759

Race: Charr
Sex: Male
Class: Ranger

Spikes at the arms with the Vigil Coat.

Fractal Shield clipping

Tested characters
Race: Charr
Sex: Female
Profession: Engineer

Race: Asura
Sex: Male
Profession: Guardian

Race: Human
Sex: Male
Profession: Warrior

The shield goes inside the hand in all cases. As it clips so heavily in the arm, it usually goes through the pauldrons and backpiece, which is rather rare. It also tends to sink into the users back when sheathed.

Asura Cultural Tier 3 Light, Savant Coat/Epaulets

Race: Asura
Class: Elementalist
Sex: Female

The coat is completely broken, it makes every single possible combination of pauldrons, including the Tier 3 one, disappear. It makes the neck piece expand over it’s limits. Even one of your main characters, Zojja, has this problem ingame and cutscenes.

I seriously hope this thread is being watched because this glitch in particular is terrible and goes about affecting even the cutscenes with zojja.